When a high-end device like the Xiaomi Redmi 8A Pro Charging Problem, won't charge, the workarounds could be with its hardware and accessories or it could just be a minor problem with the software. As an owner, you should do some troubleshooting procedures to determine what the problem is and hopefully fix it.
On the schematic image listed above, there is a component that prevents the Xiaomi Redmi 8A Pro from charging. Then, replace the defective part with a replacement part in good condition.
Here are some steps to solve Xiaomi Redmi 8A Pro charging problem
1. Check the USB charging port
The cause of the broken Xiaomi Redmi 8A Pro charging pin may not be due to the wear of the USB port. So the line is cut and the voltage cannot be transferred and saved to the battery of the phone. Change the charging USB port immediately, if it is damaged and does not cause problems with the phone charger.
2. Check components and lines
Do a line check on the board if there is damage or the lines are disconnected, apply the wiring on the PCB board. And also check components that may not damage the charging pin, replace components.
 |
| Xiaomi Redmi 8A Pro Charging Problem |
On the schematic image listed above, there is a component that prevents the Xiaomi Redmi 8A Pro from charging. Then, replace the defective part with a replacement part in good condition.
Doing some of the above can fix the problem of Redmi 8A Pro not charging, make sure you have checked the damage carefully. Use a multimeter to measure the components on each component and the path on the PCB board is damaged.
Those are some of the ways to fix Huawei P20 Lite that won't charge because damage like this happens very often. For more information and new tips and tricks on solving problems of other Android phones. Continue to visit this page. We will update it if there is a new update.
Tags:
Xiaomi
