When a high-end device like the Samsung Galaxy A03s Charging Problem, the problem could be with its hardware and accessories or it could be just a minor issue with the software. As an owner, you should do some troubleshooting to determine what the problem is and hopefully fix it.
On the schematic image listed above, there is a component that has the problem of Samsung Galaxy A03s phone not accepting charge. Then, immediately replace the defective part with a replacement part in good condition.
Here are some steps to solve Samsung Galaxy A03s A037 charging problem
1. Check the USB charging port
The cause of damage to the Samsung Galaxy A03s charging pin may be due to corrosive destruction of the USB port.
Can be corroded due to water overflowing, damaging the port charging pin, breaking the voltage transmission line.
So the line is cut and the voltage cannot be transmitted and saved to the battery of the phone.
Change the charging USB port immediately, if it is damaged and does not cause problems with the charger on the phone.
2. Check voltage components
Do a line check on the board if there is damage or the lines are disconnected, apply the wiring on the PCB board. And also check the components that can cause damage to the charger, change components.
Samsung Galaxy A03s Charging Problem |
On the schematic image listed above, there is a component that has the problem of Samsung Galaxy A03s phone not accepting charge. Then, immediately replace the defective part with a replacement part in good condition.
Doing some of the above can fix the Samsung Galaxy A03s not charging error, make sure you've checked the damage carefully. Use the multimeter tool to measure the values on each component and the path on the damaged PCB board.
Those are some of the ways to fix Samsung Galaxy A03s not charging error because damage like this happens very often. For more information and new tips and tricks on solving problems of other Android phones. Continue to visit this page. We will update it if there is a new update.
Tags:
Samsung