You can easily search Samsung Galaxy A12 SM-A127F TestPoint by following the complete instructions below along with the image. By using ISP Pinout you can bypass FRP lock or reset user data on your device through Easy Jtag Plus or any other tool.
Repair Samsung Galaxy A12 SM-A127F lost boot or any brand phone you need two devices, one is easy jtag plus and the other is ufi box both are the best in the market. These boxes help some phones after flashing wrong firmware not showing boot on screen.
Procedure:
- You need to remove the back cover from your phone, disconnect the battery from the motherboard, the fingerprint sensor and the existing camera.
- Remove the screws from the motherboard, take it out, and put it in a safe place.
- On your motherboard, locate the six eMMC pins. The pins are Dat 0, CLK, CMD, GND, VCC, and VCCQ.
- Open the UFI and take the adapter out of it, you will see the exact same pins in the adapter I mentioned in the previous step.
- Solder 4 pins: Dat0, CLK, CMD and GND with jumper between motherboard and adapter. Leave VCC and VCCQ for USB to power them.
- Put the adapter inside the UFI box, connect the box to the computer.
- Connect the motherboard to the phone's battery, put the USB cable in the phone and connect it to the computer.
 |
| Samsung Galaxy A12 SM-A127F TestPoint |
Repair Samsung Galaxy A12 SM-A127F lost boot or any brand phone you need two devices, one is easy jtag plus and the other is ufi box both are the best in the market. These boxes help some phones after flashing wrong firmware not showing boot on screen.
Tags:
Samsung
