Samsung Galaxy A03s TestPoint

Delete password, pattern, fingerprint on Samsung Galaxy A03s with UFI Box you can easily solve with this method if you are a good technician or have experience in Android software. If the battery is not charged, your USB socket will not work properly and you will fail this method. If any problem please ask your question in the comment below, we will try our best to help you.

By using PinOUT EMMC ISP of Samsung Galaxy A03s, you can easily restore stock ROM, bypass FRP, Erase MDM Passcode (Device Lock, No Downloads Mode, No Recovery) and bypass FRP with Easy Jtag Plus or UFI Box. In this guide, we will show you the tested image and working of the pinout and Samsung Galaxy A03s TestPoint.

Image of Pinout ISP EMMC of Samsung Galaxy A03s

Hardware process:

1. You need to take the back cover out of your phone, remove the motherboard from the existing battery, fingerprint sensor and camera.
2. Remove the screws from the motherboard and take it out and put it in a safe place.
3. On your motherboard, locate the six eMMC pins. The pins are Dat 0, CLK, CMD, GND, VCC, and VCCQ.
4. Open the UFI box and take the adapter out of it. You will see the same pins I mentioned in the previous step.
5. Solder 4 pins: Dat0, CLK, CMD and GND with jumper between motherboard. Leave VCC and VCCQ for USB for power.
6. Place the adapter inside the UFI box. Connect the box to the computer.
7. Connect the motherboard to the phone's battery, put the USB cable in the phone and connect it to the computer.

Samsung Galaxy A03s TestPoint

Repair Samsung Galaxy A03s lost boot or any brand phone you need two best protectors on the market, one is easy jtag plus and the other is ufi box both best in the market. These boxes help some phones after flashing the wrong software not showing start up on the screen. You need those boxes to repair boot, remove screen password, pattern, fingerprint or bypass FRP.

How to bypass FRP of Samsung Galaxy A03s with UFI Dongle

1. Run the UFi Box software.
2. Select "Direct eMMC (ISP)".
3. Click Identify eMMC, it will recognize your device.
4. Go to the User Partition tab and click Special Task. Select Factory reset from the list of options.
5. Disconnect and reassemble your phone back to its original condition. Turn on your phone and enjoy.
6. Accomplished.