When a high-end device like the Xiaomi Redmi Note 10 Pro Charging Problem, the solution to the problem could be with its hardware and accessories or it could be just a minor problem with the software. As an owner, you should do some troubleshooting to determine what the problem is and hopefully fix it.
The schematic image is listed above, there is a component that has a problem that causes the Xiaomi Redmi Note 10 Pro phone not to charge. Then, immediately replace the defective part with a replacement part in good condition.
How to fix Xiaomi Redmi Note 10 Pro not charging error
1. Check the USB charging port
The cause of the Xiaomi Redmi Note 10 Pro charging pin failure may be due to the damaged USB port.
Corrosion can be caused by water overflowing, damaging the charging port pins and breaking the voltage transmission line.
2. Check components and voltage
Do a line check on the board if there is damage or the lines are disconnected, apply the jumper on the PCB board. And also check for components that can cause damage when charging and make replacements for those components.
 |
| Xiaomi Redmi Note 10 Pro Charging Problem |
The schematic image is listed above, there is a component that has a problem that causes the Xiaomi Redmi Note 10 Pro phone not to charge. Then, immediately replace the defective part with a replacement part in good condition.
Doing some of the above can fix the Xiaomi Redmi Note 10 Pro not charging error, make sure you check the damage carefully. Use a multimeter to measure the values on each component and the path on the damaged PCB board.
Those are some of the ways to fix the Xiaomi Redmi Note 10 Pro error that won't charge because damage like this happens very often. For more information and new tips and tricks on solving problems of other Android phones please visit this page. We will update the latest solutions here.
Tags:
Xiaomi
