Removing pattern, password, fingerprint on Samsung Galaxy M12 M127F with UFI Box is easy if you are a good technician or an experienced technician in Android software. If the battery is not charged, your USB socket will not work properly and you will fail this method. If any problem please ask your question in the comment below, we will try our best to help you.
 |
| Samsung Galaxy M12 M127F TestPoint |
You can easily find the Samsung Galaxy M12 M127F TestPoint by following the full instructions below along with the image. By using ISP Pinout you can bypass FRP or reset user data on your device through Easy Jtag Plus Box or any other tool.
Samsung Galaxy M12 ISP EMMC Pinout
Hardware process:
- You need to remove the back cover from your phone, remove the motherboard from the existing battery, fingerprint sensor and camera.
- Remove the screws from the motherboard and take it out and put it in a safe place.
- On your motherboard, locate the six eMMC pins: Dat 0, CLK, CMD, GND, VCC, and VCCQ.
- Open the UFI and take out the adapter, you will see the exact same pins in the adapter I mentioned in the previous step.
- Solder 4 pins: Dat0, CLK, CMD and GND with jumper between motherboard and adapter. Leave VCC and VCCQ for USB to power them.
- Put the converter inside the UFI. Connect the box to the computer.
- Connect the motherboard to the phone's battery. Then put the USB cable in the phone and connect it to the computer.
Repair Samsung Galaxy M12 M127F dead boot or any brand phone you need two best devices in the market, one is easy jtag plus and the other is ufi box. These boxes help some phones after flashing the wrong software not showing start up on the screen.
Tags:
Samsung
